MULTI MAT
Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use.
Size Part #
8x10 15-1100-00
8x12 15-1107-00
12x12 15-1101-00
16x12 15-1102-00
12x24 15-1106-00
16x24 15-1103-00
24x24 15-1104-00
24x48 15-1105-00
Back To Top
PEN ROTARY ATTACHMENT
Now you're not just limited to engraving lengthwise on your pens, cigar holders, miniature baseball bats or other cylindrical items…with the PEN ROTARY ATTACHMENT, you can engrave around the entire circumference! Compatible with any Vision Engraving System, it can hold items up to 1.5" in diameter (1.25" dia on VE-810) and up to 7" in length.
Part # 15-0063-00
Back To Top
WEDGE CLAMP
Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables.
Part # 200114-00
Back To Top
EDGE CLAMP
This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables.
Part # 200113-00
Back To Top
CORNER CLAMP
This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables.
Part # 200115-00
Back To Top
UNIVERSAL CLAMPING BARS w/MEDALLION HOLDER
These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system.
Part # 200110-00
Back To Top
SELF-CENTERING DEEP VISE
This vise can be used with the VE-810XD and the VE-810 or the Phoenix 1212. The self-centering design allows easy setup of odd-shaped items up to 3 1/4" deep.
Part # 15-0038-00
For use with the VE-810XD, the VE-810 (machines shipped before May 2007), and the Phoenix 1212 (shipped before November 2007).
Part # 15-0055-00
For use with the New Phoenix 1212 (machines shipped after November 2007).
Back To Top
RING ATTACHMENT
This fixture allows you to engrave around the inside and outside of most rings or other cylindrical objects.
(Compatible with the MAX and Max Pro.)
Min. Dia: 5/8" Max Dia: 4"
Part # 15-6000-00
Back To Top
PEN & MEDALLION FIXTURE
This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables.
Part # 200106-00
Back To Top
PUSH-DOWN CLAMP
This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved.
Fits all Vision T-slot tables.
Part # 15-0010-00 - (one 4” clamp)
Part # 15-0010-01 - (one 2.5” clamp)
Part # 15-0010-ROUT - (two 2.5” clamps, two 4” clamps & one nut driver)
Part # 12-0004-00 - (nut driver)
Back To Top
Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other irregular-shaped items.
Part # 200111-00
Back To Top
MULTIPLE UNIVERSAL PIN FIXTURE VISE
This combination of a Versa Vise and three universal pin fixtures enables quick and easy setup for engraving multiple items of various shapes. Fits all Vision T-slot tables.
Part # 200112-00
Back To Top
VERSA VISE
The Versa Vise can be used alone or in conjunction with other fixtures to hold a variety of shapes and sizes.
Part # 200102-00
Also sold with a package of fixtures:
Part # 200102-WJ
(universal clamping bars w/ medallion holders; universal pin fixture, and pen/medallion fixture)
Back To Top
SEAL FIXTURE
This fixture enables engraving on 1 5/8" & 2" diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables.
Part # 200107-00
Back To Top
QUICK-LOCK VISE
This vise is specifically designed for T-slot table users. Its “cam” type locking device allows for quick changing of parts. Supplied with a removable front clamping plate which allows for holding thicker items. Fits all Vision T-slot tables.
Part # 200100-00 - (fits Phoenix 1212, 1612, 1624, 2424, 2448 w/ T-slots)
Part # 200101-00 - (fits VE-810, VE-810XD and MAX)
Back To Top