AUTOMATIC Raster™ BRAILLE INSERTION TOOL
The Raster™ Pen Braille insertion device is an option for our engraving and routing systems. Vision-Pro software includes Braille fonts and is fully compatible with the Raster™ Method. Vision machinery allows precise placement of the Rasters™ (braille beads), which are essential for shops producing ADA-compliant signage. The Raster™ Method of Braille insertion and Raster™ Pen are licensed, patented products owned by Accent Signage Systems, Inc. Minneapolis, MN.
Part # 15-0081-00 (Bracket for Raster™ Pen )
Part # 40-0002-00 (Raster™ Pen 11/64")
Part # 40-0002-01 (Raster™ Pen 1/4")
Back To Top
3HP HIGH FREQUENCY SPINDLE
1/4” collet and high frequency inverter drive included. Variable speed from 3,000-18,000RPM. Low noise relative to other router heads.
(220V Required)
Part # 15-0052-00
| Collets | |
| Size | Part # |
| 1/8" | 13-0018-00 |
| 3/16" (4-5mm) | 13-0026-00 |
| 1/4" (6-7mm) | 200219-00 |
| 5/16" (8-9mm) | 13-0029-00 |
| 11/32" | 13-0028-00 |
| 3/8" | 13-0008-00 |
| ½" | 200219-01 |
Back To Top
3.25HP ROUTER HEAD
Variable speed router head from Porter Cable™. ½" & 1/4” collets are included.
Part # 15-0050-00
| Collets | |
| Size | Part# |
| 1/4" | 13-0006-00 |
| 3/8" | 13-0007-01 |
| ½" | 13-0007-00 |
Back To Top
ENGRAVING HEAD
Choice of 1/4” or 11/64” top loading or optional collet spindle.
Part # 15-0001-00
Back To Top
ROUTER DUAL CARRIAGE
Must be factory installed, and cannot be removed for single head engraving. Can hold router head or engraving head.
(Engraving head or router head not included)
Part # 15-0034-00
Back To Top
HIGH-FREQUENCY 60,000 RPM ENGRAVING SPINDLE
Deep engrave into metals up to 3 times faster than with a standard spindle! This spring-loaded spindle option with floating nose cone allows for consistent depth engraving into hard materials. The high RPM allows cutters to stay sharp much longer for increased production. The RPM is adjustable manually with the included control box. The spindle comes standard with a 1/8" collet.
Part # 13-1100-00
Back To Top
HAND-HELD PENDANT
This accessory is exactly what you need to get up close to your table for those fine adjustments. This hand-held pendant has all of the controls featured with the Series 3 Controller.
Part # 15-2531-00
Back To Top
VACUUM CHIP REMOVAL SYSTEM
Quiet vacuum pump for removing engraving chips. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and kink resistant hose.
Part # 200506-00 - (1/4 HP pump with large nose)
Part # 200507-00 - (1/4 HP small nose)
Part # 15-0029-00 - (10’ kink resistant hose)
Part # 15-0026-00 - (10’ kink resistant hose w/ large nose)
Part # 15-0027-00 - (10’ kink resistant hose w/ small nose)
Back To Top
HEAVY DUTY CASTERS
Part # 506330-00 - (Set of 4 Required)
Back To Top
ACCESSORY STRIP
Accessory Strip for all our Vision Engraving machines.
Part # 15-0044-00, Accessory Strip, 110 Volts AC
Part # 15-0005-00, Accessory Strip, 220 Volts AC
Back To Top
VISION EXTENDED WARRANTY PLANS
Protect your investment with an extended service plan before your warranty expires! Extended Service Plans cover the cost of service parts, labor, and annual preventive maintenance completed at the factory. For more information or to purchase a service plan, please call our technical support department at 602-439-0700.
Part # 19-CNTL-00 Extended Warranty Series 3 Controller
Part # 19-2424-RT Extended Warranty 2424 Router Table
Part # 19-2448-RT Extended Warranty 2448 Router Table
Back To Top
DACS (Digitally Aligned Cutting System)
DACS, an alignment tool which provides perfect print-to-cut registration for our routing machines. This easy-to-use system requires minimal training and setup time, and is the most cost-effective, accurate solution for improving digital finishing.
Back To Top